Home page
About us
Services
Glass Products & usage
Glass Tech
Contact us
GLASSPRO COMMERCIAL
THE GLASS PROFESSIONALS
Glass Tech

From an Architectural scaled drawing, to Glasspro Commercials' detailed setout following AS1288:2006 recommendations,
we then make this project become a reality 

Architects preliminary detail     Glasspros' submitted detail & final site measure & dimensions 

Installation of Ceiling brackets & Hilites Hilites set in place Sidelites installed, rail fittings & tube connected to Hilites & Sidelites Top rollers bodies attached to Toughened Glass & installed onto top rail
  Glass butt joints filled with silicone & final adjustments made Door handles fitted & bottom guides in place The finished product Looks good from all angles

Ever wanted to measure & install your own Toughened Entry door?  Follow these easy steps & in no time you will be d.i.y.
Just hover your mouse over the captions

1) Check for plumb2) Check for level3) Measure height -15mm4) Measure width -10mm5) Measure centre of door jamb6) Measure from door jamb to centre of hole7) Drill hole8) Fit bot pivot,screw fix & check centre of pivot9) Fit top pivot the same dist to centre from jamb as bot pivot10) Fit top & bottom patches to door & lower door onto bottom pivot then......11) fit top patch pivot to top pivot, tighten & hey presto all done


10000000111100001100110010000000111100001100000011111111111111111111111111001100111100001100110011110000110011001111000011001100
Home pageAbout usServicesGlass Products & usageGlass TechContact us
ABN 75437372212